Modello:

HARMONIE 40(HARMONIE-AROME Cy40) from the Netherland Weather Service

Aggiornato:
4 times per day, from 06:00, 12:00, 18:00, and 00:00 UTC
Greenwich Mean Time:
12:00 UTC = 14:00 CEST
Risoluzione:
0.025° x 0.037°
Parametro:
CAPE and vertical velocity at 700 hPa
Descrizione:
The Convectively Available Potential Energy (CAPE) map - updated every 6 hours - shows the modelled convectively available potential energy. CAPE represents the amount of buoyant energy (J/kg) available to accelerate a parcel vertically, or the amount of work a parcel does on the environment. The higher the CAPE value, the more energy available to foster storm growth. The potential energy can be converted to kinetic energy reflected in upward motion.
It should be remembered that CAPE represents potential energy, and will only be used should a parcel be lifted to the level of free convection. When values are above 3500 j/kg and storms do develop, they may build rapidly and quickly become severe. Often these storms are referred to as "explosive storms" by chasers and professionals. In a high CAPE environment storms that develop can usually be seen by the human eye as rising rapidly. Higher CAPE typically involves stronger storms with a higher chance of large hail and other severe weather. Note that CAPE is usually of lesser importance than the vertical shear environment for tornadoes. The probability of large hail increases with CAPE, given at least moderate shear(values around 500-1000 J/kg are sufficient).
CAPE is very sensitive to small differences in the moisture and temperature profiles. While the maps indicate 1000 J/kg CAPE at some location, a skew-T thermodynamic diagram at that location may indicate 500-1500 J/kg. (Source: The Lightning Wizard)
Table 1: Characteristic values for CAPE
CAPE value Convective potential
0 Stable
0-1000 Marginally Unstable
1000-2500 Moderately Unstable
2500-3500 Very Unstable
3500 + Extremely Unstable
HARMONIE:
HARMONIE-AROME The non-hydrostatic convection-permitting HARMONIE-AROME model is developed in a code cooperation of the HIRLAM Consortium with Météo-France and ALADIN, and builds upon model components that have largely initially been developed in these two communities. The forecast model and analysis of HARMONIE-AROME are originally based on the AROME-France model from Météo-France (Seity et al, 2011, Brousseau et al, 2011) , but differ from the AROME-France configuration in various respects. A detailed description of the HARMONIE-AROME forecast model setup and its similarities and differences with respect to AROME-France can be found in (Bengtsson et al. 2017). [From: HIRLAM (2017)]
NWP:
Numerical weather prediction uses current weather conditions as input into mathematical models of the atmosphere to predict the weather. Although the first efforts to accomplish this were done in the 1920s, it wasn't until the advent of the computer and computer simulation that it was feasible to do in real-time. Manipulating the huge datasets and performing the complex calculations necessary to do this on a resolution fine enough to make the results useful requires the use of some of the most powerful supercomputers in the world. A number of forecast models, both global and regional in scale, are run to help create forecasts for nations worldwide. Use of model ensemble forecasts helps to define the forecast uncertainty and extend weather forecasting farther into the future than would otherwise be possible.

Wikipedia, Numerical weather prediction, http://en.wikipedia.org/wiki/Numerical_weather_prediction(as of Feb. 9, 2010, 20:50 UTC).